KFSensor Manual | KeyFocus

The Name Service is one of four services that make up the Microsoft Windows networking system.

For more information on this server and how to configure it see the Window networking / NetBIOS / SMB / CIFS section in the KFSensor Administration Guide.

Name
Each Sim Std Server requires a unique name, which is used to identify it.
Description
A piece of text for notes on what the Sim Std Server aims to support
Default Port
Most services have standard ports on which visitors expect to find them.
The default port is UDP 137.
This is only used as a prompt during configuration of a Listen; a Sim Std Server can be set on any or many different ports.
Severity
The severity level that events generated by this Sim Std Server will be given. This can be overridden as part of the Listen configuration.

These settings control how the data is logged.

Log Detail
This controls how much detail of the decoded packets is recorded.

Type	Description
Basic	Provides a brief summary of the main points of interest in the packet. Use this options if you are receiving a lot of traffic and want to minimize the size of your log files.
Normal	Provides details of all the parameters of each packet.
Debug	Provides all the details, in normal mode, plus the complete data blocks transferred with the packet. The log size can grow very large with this option

Log decoded packet
If checked then each packet will be decoded and logged in a human readable format.
Log raw packet
If checked then the raw binary data of the packet will be logged. If both this option and the one above are checked then each packet will be logged first in decoded format and then as a binary value.

Log only when responded
If checked then an event will only be logged if this sim server sends a response to the visitor.
This will reduce the number of events generated.

NBT Settings
This button displays the NBT Settings dialog box.
This contains settings common to all four NBT services.